BNSQT - MINICEL TYPE LF CROSSLINKED POLYETHYLENE FO
- MSDS: BNSQT
- Manufacturer: VOLTEK DIV OF SEKISUI AMERICA
- Product Name: MINICEL TYPE LF CROSSLINKED POLYETHYLENE FO
- National Stock Number: 8305-00N032420
Product Identification
Product ID:MINICEL TYPE LF CROSSLINKED POLYETHYLENE FO
MSDS Date:09/16/1986
FSC:8305
NIIN:00N032420
MSDS Number: BNSQT
Responsible Party
LAWRENCE, MA 01843
US
Emergency Phone: 617-685-2557
Info Phone: 617-685-2557
Cage: 58604
Contractor
Telephone: 617-685-2557
Cage: 58604
Ingredients
ANTIMONY OXIDE; (SB*2O*3) (ANTIMONY TRIOXIDE) (PEL/TLV AS
CAS: 1309-64-4
RTECS: CC5650000
OSHA PEL 0.5 MG/M3
ACGIH TLV: 0.5 MG/M3
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ETHER, BIS (PENTABROMOPHENYL); (DECABROMODIPHENYL ETHER)
CAS: 1163-19-5
RTECS: KN3525000
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL:SOLID, NOT RESPIRABLE.
SKIN:MOLTEN MATERIAL CAUSES BURN. INGEST:NOT A PROBABLE ROUTE OF
EXPOSURE.
Explanation of Carcinogenicity:ANTIMONY TRIOXIDE:GROUP 2B (IARC).
Effects of Overexposure:SEE HEALTH HAZARDS.
First Aid
First Aid:INGEST:CALL MD IMMEDIATELY . INHAL: REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O2/ARTF RESP) . EYES: IMMEDIATELY FLUSH
W/POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM M
D . SKIN:IF MOLTEN MATERIAL CONTACTS SKIN COOL RAPIDLY W/WATER. GET
MD FOR THERMAL BURNS.
Fire Fighting
Extinguishing Media:WATER, CO2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL WILL FLOAT.
Accidental Release
Spill Release Procedures:SWEEP UP OR PICK UP TO AVOID SLIPPING HAZARD.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:COOL, DRY PLACE.
Other Precautions:AVOID OPEN FLAMES, MATERIAL WILL BURN.
Exposure Controls
Respiratory Protection:NONE UNDER NORMAL CONDITIONS. USE NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST IF MATERIAL IS HEATED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO:(-CH2-)X, FIRE RETARDANT.
Chemical Properties
HCC:N1
Spec Gravity:0.03 (H2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE CELLED FOAM, CHARACTERISTIC ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:STABLE UNDER NORMAL CONDITIONS.
Hazardous Decomposition Products:CO2, CO, HYDROCARBONS, HYDROGEN
BROMIDE.
Conditions to Avoid Polymerization:EXTREME HEAT ABOVE 316C.
Disposal
Waste Disposal Methods:INCINERATION OR LANDFILL IN COMPLIANCE
W/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.